Building Energy Software Tools
Formerly hosted by US Dept. of Energy    

Top Rated Software

Total Listed Softwares: 200
The Physibel software is a set of 1D/2D/3D steady state and transient heat transfer simulation programs: BISCO, TRISCO, SOLIDO, BISTRA, VOLTRA, CAPSOL, GLASTA
  1. Other
Last Software Update: 04 February 2015
Last Entry Update:
23 September 2018

Ratings

0

Reviews 0

Add to compare
GeoHECRAS is an AutoCAD, MicroStation and ESRI ArcGIS compatible interactive 2D/3D graphical user interface data wrapper to the US Army Corps of Engineers HEC-RAS.
  1. Other
Last Software Update: 14 December 2018
Last Entry Update:
05 January 2019

Ratings

0

Reviews 0

Add to compare
Tool for evaluation: energy efficiency ( electricity, wáter, fuel oil, etc...), CO2, H2O, Savings, abatement curves in Buildings of Institutions (Health Care, University, Army Forces, School, Government, etc.)
  1. Utility Bill and Meter Data Analysis
  2. Building Energy Auditing
  3. Building Energy Benchmarking
Last Software Update: 17 December 2015
Last Entry Update:
24 September 2018

Ratings

0

Reviews 1

Add to compare
Software for design of vertical borehole-type ground loop heat exchangers used in geothermal heat pump systems.
  1. HVAC System Selection and Sizing
Last Software Update: 09 December 2014
Last Entry Update:
19 September 2018

Ratings

0

Reviews 0

Add to compare
We offer hourly support services for EnergyPlus, OpenStudio, DesignBuilder, and the California Simulation Engine (CSE) under the hood of CBECC-Res. We are a team of energy modelers and programmers with many years of experience providing support, training, and software tools for EnergyPlus.
  1. Support Services
Last Software Update: 16 July 2018
Last Entry Update:
11 October 2018

Ratings

0

Reviews 0

Add to compare
Make Better Energy Decisions Using Your Data. A smart energy platform to help you quickly and easily automate analysing energy data.
  1. Utility Bill and Meter Data Analysis
  2. Building Energy Auditing
  3. Building Energy Benchmarking
Last Software Update: 23 July 2018
Last Entry Update:
24 September 2018

Ratings

5

Reviews 0

Add to compare
Sefaira offers the industry’s only software for real-time Performance Based Design.
  1. Whole Building Energy Simulation
  2. Parametrics and Optimization
  3. Lighting Simulation
Last Software Update: 21 January 2015
Last Entry Update:
19 September 2018

Ratings

5

Reviews 0

Add to compare
New solar thermal water heating systems online simulation software available in Spanish and English
  1. HVAC System Selection and Sizing
  2. Solar and Photovoltaic Analysis
Last Software Update: 22 March 2016
Last Entry Update:
24 September 2018

Ratings

0

Reviews 0

Add to compare
Is your building energy efficient? This building energy performance tool by Lucid, ENERGY STAR & the DOE will tell you in seconds. Try it today!
  1. Building Energy Benchmarking
Last Software Update: 01 June 2017
Last Entry Update:
18 July 2018

Ratings

0

Reviews 0

Add to compare
TREAT is winner of the prestigious R&D 100 award and still the only energy audit software approved by the DOE for all residential housing types – including multifamily.
  1. Whole Building Energy Simulation
  2. Energy Conservation Measures
  3. Building Energy Auditing
Last Software Update: 01 October 2015
Last Entry Update:
24 September 2018

Ratings

2

Reviews 0

Add to compare
Home Energy Score is DOE's program for rating a home's physical assets, it's envelope, lighting, HVAC, and water heating systems; controlling for occupancy, use, and weather. Home Energy Score produces a 1-10 score along with a list of recommended cost-effective upgrades.
  1. Energy Conservation Measures
  2. Ratings and Certificates
  3. Building Energy Auditing
Last Software Update: 27 October 2017
Last Entry Update:
26 August 2018

Ratings

0

Reviews 0

Add to compare
Perform faster home energy audits. Achieve better conversion rates. Produce accurate results and deliver beautiful reports every time. Snugg Pro is a cloud-based auditing and sales tool for home performance professionals.
  1. Load Calculations
  2. Energy Conservation Measures
  3. Utility Bill and Meter Data Analysis
Last Software Update: 23 September 2015
Last Entry Update:
24 September 2018

Ratings

4.5

Reviews 0

Add to compare
Software package for load calculation and energy and economic comparative analysis. System Analyzer permits a quick evaluation of virtually any building, system, and equipment combination.
  1. Air Flow Simulation
Last Software Update: 23 January 2009
Last Entry Update:
18 July 2018

Ratings

0

Reviews 0

Add to compare
The Building Energy Data Exchange Specification (BEDES) is a living data dictionary for building energy data. It facilitates the exchange of information on building characteristics and energy use.
  1. Other
Last Software Update: 02 November 2018
Last Entry Update:
02 November 2018

Ratings

0

Reviews 0

Add to compare
epwmap is an interactive map for EPW weather files.
  1. Weather Data and Climate Analysis
Last Software Update: 03 December 2015
Last Entry Update:
21 September 2018

Ratings

0

Reviews 0

Add to compare
TRACE™ 700 is an award-winning design-and-analysis software program that helps HVAC professionals optimize the design of a building’s heating, ventilating and air-conditioning system based on energy utilization and life-cycle cost.
  1. Whole Building Energy Simulation
  2. Air Flow Simulation
  3. Life Cycle Analysis
Last Software Update: 15 October 2015
Last Entry Update:
18 July 2018

Ratings

4

Reviews 0

Add to compare
BACnet Device Simulator simulates all the devices and all the object types of devices in the network. It allows developers and system integrator to configure, monitor and issue service commands to accessible physical and virtual devices on the network
  1. Building Automation
  2. Building Energy Monitoring
  3. Other
Last Software Update: 19 October 2016
Last Entry Update:
24 September 2018

Ratings

0

Reviews 0

Add to compare
Traditional CFD packages are notoriously difficult to use as they are used to analyse a wide range of problems. Ambiens 2D is different. Ambiens 2D is a CFD package with a very specific purpose – modelling airflow in buildings, and as a result, it’s incredibly user friendly.
  1. Air Flow Simulation
  2. Other
Last Software Update: 24 May 2018
Last Entry Update:
17 September 2018

Ratings

0

Reviews 0

Add to compare
Group of CYPE programs for thermal and energy analysis of buildings. The applications that work with the 3D model of the building are integrated in the OPEN BIM workflow via the IFC4 standard.
  1. Whole Building Energy Simulation
  2. Load Calculations
  3. Code Compliance
Last Software Update: 02 October 2015
Last Entry Update:
23 September 2018

Ratings

5

Reviews 0

Add to compare
The National Energy Audit Tool (NEAT) is an easy-to-use yet sophisticated Windows-based software tool designed for use within weatherization-type programs to identify cost-effective energy conservation measures for single-family, site-built homes and small multifamily homes.
  1. Whole Building Energy Simulation
  2. Energy Conservation Measures
  3. Building Energy Auditing
Last Software Update: 10 February 2012
Last Entry Update:
25 August 2018

Ratings

0

Reviews 0

Add to compare
LightStanza is a dynamic start-to-finish tool that helps users optimize their daylighting strategies and comply with industry certifications and energy efficiency for green building, as well as inhabitants’ well-being within spaces.
  1. Weather Data and Climate Analysis
  2. Lighting Simulation
Last Software Update: 23 February 2016
Last Entry Update:
24 September 2018

Ratings

0

Reviews 0

Add to compare
REM/Rate™ is a user-friendly, sophisticated, residential energy analysis, code compliance and Home Energy Rating (HERS®) software developed specifically for the needs of HERS® Providers and Home Energy Raters.
  1. Whole Building Energy Simulation
  2. Code Compliance
  3. Ratings and Certificates
Last Software Update: 25 May 2017
Last Entry Update:
29 August 2018

Ratings

0

Reviews 0

Add to compare
Lesosai allows the calculation of environmental impacts of the energy consumption, taking into account the energy used in the building, but also the building's construction materials (Life Cycle Impacts Analysis / Environmental Assessment).
  1. Load Calculations
  2. Code Compliance
  3. Life Cycle Analysis
Last Software Update: 16 September 2015
Last Entry Update:
24 September 2018

Ratings

0

Reviews 0

Add to compare
Evaluation of environmental impacts of buildings using life cycle assessment
  1. Whole Building Energy Simulation
  2. Ratings and Certificates
  3. Life Cycle Analysis
Last Software Update: 22 October 2015
Last Entry Update:
23 September 2018

Ratings

5

Reviews 0

Add to compare
COMFEN is a tool designed to support the systematic evaluation of alternative fenestration systems for project-specific commercial building applications.
  1. Parametrics and Optimization
  2. Energy Conservation Measures
  3. Lighting Simulation
Last Software Update: 29 September 2018
Last Entry Update:
02 November 2018

Ratings

0

Reviews 0

Add to compare
Ladybug is a free and open source environmental plugin for Grasshopper to help designers create an environmentally-conscious architectural design.
  1. Parametrics and Optimization
  2. Weather Data and Climate Analysis
  3. Other
Last Software Update: 09 November 2015
Last Entry Update:
24 September 2018

Ratings

0

Reviews 0

Add to compare
eQUEST® is a widely used, time-proven whole building energy performance design tool.
  1. Whole Building Energy Simulation
Last Software Update: 30 June 2010
Last Entry Update:
19 September 2018

Ratings

0

Reviews 0

Add to compare
Looplink PRO is simple, powerful, web-based ground loop design software you can use for just $50/month. Specifically engineered for commercial geothermal designers, LoopLink PRO can handle projects from simple single building block loads all the way up to multi-building/multi-zone campuses.
  1. HVAC System Selection and Sizing
  2. Other
Last Software Update: 16 September 2016
Last Entry Update:
19 September 2018

Ratings

0

Reviews 0

Add to compare
The tool includes the evaluation of the application of complex glazing system such as laser cut panels (LCP) and provides outputs regarding availability of daylight in spaces using EnergyPlus.
  1. Lighting Simulation
  2. Other
Last Software Update: 13 September 2016
Last Entry Update:
19 September 2018

Ratings

0

Reviews 0

Add to compare
The main content of portal is a set of computing web applications (programs) for the construction industry, especially in the field of energy and building physics. Most DEKSOFT programs have been developed specifically for use in the Czech Republic and Slovakia.
  1. Load Calculations
  2. Building Energy Auditing
  3. Solar and Photovoltaic Analysis
Last Software Update: 20 April 2018
Last Entry Update:
18 July 2018

Ratings

0

Reviews 0

Add to compare
BSIMAC's three main functions are: (a) calculation of the cooling/heating loads and the required capacities of HVAC equipment, (b) annual energy simulation of the building and HVAC equipment, and (c) calculation of the expected room (space) temperatures with no cooling or heating on summer and
  1. Whole Building Energy Simulation
  2. Load Calculations
  3. HVAC System Selection and Sizing
Last Software Update: 02 October 2015
Last Entry Update:
23 September 2018

Ratings

0

Reviews 0

Add to compare
Refrigeration Load Calculation Software
  1. Load Calculations
Last Software Update: 30 June 2010
Last Entry Update:
25 August 2018

Ratings

0

Reviews 0

Add to compare
UrbaSun is a software to compute solar radiation in urban areas.
  1. Weather Data and Climate Analysis
  2. Solar and Photovoltaic Analysis
Last Software Update: 26 February 2016
Last Entry Update:
29 August 2018

Ratings

0

Reviews 0

Add to compare
From data collection, to measure analysis, to reporting - OptiMiser Commercial puts the entire audit cycle at your fingertips, eliminating hours of spreadsheet manipulation and report preparation.
  1. Load Calculations
  2. Energy Conservation Measures
  3. Building Energy Auditing
Last Software Update: 01 March 2017
Last Entry Update:
17 September 2018

Ratings

0

Reviews 0

Add to compare
demand response assessment, commercial buildings, demand responsive,
  1. Whole Building Energy Simulation
  2. Energy Conservation Measures
  3. Code Compliance
Last Software Update: 30 March 2015
Last Entry Update:
26 August 2018

Ratings

0

Reviews 0

Add to compare
e!Sankey is a software solution for creating appealing Sankey diagrams depicting energy flows.
  1. Other
Last Software Update: 05 November 2015
Last Entry Update:
27 August 2018

Ratings

0

Reviews 0

Add to compare
Euclid is a free and open-source extension for SketchUp that makes it easy to create and modify the geometry inputs for building energy models.
  1. Other
Last Software Update: 09 May 2017
Last Entry Update:
11 October 2018

Ratings

0

Reviews 0

Add to compare
The SEED Platform™ makes it easy to manage and share data on the energy performance of buildings.
  1. Building Energy Benchmarking
Last Software Update: 04 October 2015
Last Entry Update:
02 November 2018

Ratings

0

Reviews 0

Add to compare
BSim Follow the external link to BSim for additional description of this tool and ordering.
  1. Whole Building Energy Simulation
  2. Air Flow Simulation
Last Software Update: 10 June 2015
Last Entry Update:
24 September 2018

Ratings

0

Reviews 0

Add to compare
PRIMERO-Comfort is based on the dynamic simulation program EnergyPlus software for the evaluation and optimization of thermal comfort and the resulting cooling energy demand in a single room.
  1. Whole Building Energy Simulation
  2. Parametrics and Optimization
  3. Ratings and Certificates
Last Software Update: 26 July 2016
Last Entry Update:
24 September 2018

Ratings

0

Reviews 0

Add to compare

Pages